Black Dog Technologies

Pages

  • Home
  • Electronix
  • Magnetix
  • Metalwerx
  • Woodwerx
  • Organix
  • Contax

Sunday, January 22, 2017

Nuf Said...


Posted by Z.Monkey at 3:47 PM No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Newer Posts Older Posts Home
Subscribe to: Comments (Atom)

Total Pageviews

Search for Stuffz...

Latest Stuff

  • RX300 Windows Tech Brief
    There are probably many suitable relays available from several manufacturers.  I picked a Panasonic Relay because the RX300 was originally f...
  • Iron Pan Refurb
     I've had this 14 inch Lodge Fry Pan since the 1990's.  So many foods in a couple decades.  All they typical stuff like Bacon, Break...
  • RX300 Windows
    Victory!  I have been trying to repair the intermittent behavior with the RX300 Windows for a long time.  Even after identifying the bad par...
  • Tap, Stud, Nut, and Cap
     I had ordered 1.25 inch threaded rods for the studs.  Once I got them I realized that the pilot holes needed to be a little deeper.  Then t...
  • CEG Rotor
     OK, I finally have the major cuts done on the CEG Rotor.  This includes the radial cut where I made the round shape of the rotor, and the p...
  • RX300 Door Lock Actuators
     Possibly the most irritating problem I've had with the RX300 is the door lock actuators failing.  This is not a problem that is obvious...
  • Office Chair
     After refurbishing the original RX300 driver's seat, now I have an extra RX300 driver's seat.  Originally I got this seat because t...
  • 3D Printer
    I've been working with the Velleman K8200 3D Printer.  This surprisingly affordable kit has been a really exciting project for me.  Some...
  • Z Gate
    This is the follow up to Double Stump .  I had decided to use 6 x 6 Posts, and did the same on the other side of the Z Gate.  So the mountin...
  • Trimmer Fuel Lines
    During the process of replacing the Starter string on the String Trimmer I had some tuning issues with the Fuel System.  In the process of t...

Blog Archive

  • ►  2026 (1)
    • ►  January (1)
  • ►  2025 (1)
    • ►  April (1)
  • ►  2024 (1)
    • ►  January (1)
  • ►  2022 (22)
    • ►  October (4)
    • ►  September (2)
    • ►  August (1)
    • ►  July (2)
    • ►  June (2)
    • ►  May (1)
    • ►  April (3)
    • ►  March (3)
    • ►  February (1)
    • ►  January (3)
  • ►  2021 (10)
    • ►  September (1)
    • ►  July (1)
    • ►  May (3)
    • ►  March (2)
    • ►  February (2)
    • ►  January (1)
  • ►  2020 (8)
    • ►  December (2)
    • ►  November (2)
    • ►  July (2)
    • ►  May (1)
    • ►  March (1)
  • ►  2019 (1)
    • ►  July (1)
  • ►  2018 (3)
    • ►  June (1)
    • ►  March (1)
    • ►  January (1)
  • ▼  2017 (17)
    • ►  December (3)
    • ►  July (1)
    • ►  May (2)
    • ►  April (5)
    • ►  March (4)
    • ►  February (1)
    • ▼  January (1)
      • Nuf Said...
  • ►  2016 (13)
    • ►  December (3)
    • ►  November (1)
    • ►  June (1)
    • ►  May (3)
    • ►  April (4)
    • ►  February (1)
  • ►  2015 (9)
    • ►  July (2)
    • ►  March (2)
    • ►  February (2)
    • ►  January (3)
  • ►  2014 (10)
    • ►  December (1)
    • ►  November (1)
    • ►  September (1)
    • ►  August (2)
    • ►  July (2)
    • ►  February (2)
    • ►  January (1)
  • ►  2013 (9)
    • ►  December (3)
    • ►  October (4)
    • ►  September (2)
  • ►  2012 (7)
    • ►  August (6)
    • ►  January (1)

About Me

Z.Monkey
View my complete profile

Followers
Copyright 2012, Black Dog Technologies, all rights reserved.. Awesome Inc. theme. Powered by Blogger.